Light Cast Public Safety
1-678-339-2326 ext 2 sales

Call or Email for updated specifications (PDF)

Click the button to print the current page.

Hazard Flashing Beacon LC106-S8
Solar Hazard Flashing Beacons

Read Later

Flashing 24 hours a day, seven days a week, the model LC106-S8 Hazard beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 Hazard flasher are used to help warn vehicular traffic to possible hazardous areas or intersections ahead. dangerous curves, stop ahead, dangerous crossings, road construction, and speed zones are just a few of the many applications where solar stationary flashing beacons will enhance the visibility of roadway signage.

Model 118-D12* Shown with optional signage and Round Aluminum Crash Tested Pole

Solar_panel

Our Solar Stop Beacons utilize the most up to date solar and electronics to maintain power levels through rain, shine, sleet, or snow


LED

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs


MUTCD

Meets MUTCD (Manual on Uniform Traffic Control Devices)


 

 


ITE

Meets ITE Standards (Institute of Transportation Engineers)


Saferoutes

The system fits into Safe Routes to School (SRTS) infrastructure funding models


Crashworthy

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)



Our SPLasher device is a compact, all-in-one solar controller, flasher, and auto-dimmer for flasher beacons. The way it works is energy efficient and simple! The SPLasher uses Maximum Power point Tracking (MPPT) which extracts maximum power from the solar panel regardless of the environment.

SPLasher Diagram

 


Question: How long does the battery last?

Answer: Typically the average life span of a battery is anywhere from 3-5 years.

 

Question: If I furnish my own battery what type do I need?

Answer: You will need a 110 amp deep cycle battery. They make various types of batteries from wet cell to AGM batteries. Our recommendation would be a sealed AGM battery for maintenance reasons.

 

Question: Do you provide a battery with the system?

Answer:  Our standard system does not come with a battery but it may be purchased as an option. Please see our options tab for further information.

 

Question: What is the typical battery backup? (days to run without solar input)

Answer: Our standard systems have at least 7 days of battery backup using a 110 amp battery.

 

Question:  Does signage come with the unit?

Answer:  Our standard system does not come with a sign but it may be purchased as an option. Please see our options tab for further information.

 

Question:  How many hours per day are these systems designed to run?

Answer:  Our systems are designed to run 24 hours a day 7 seven days a week. Our standard system will work in most states but some of the more northern territories may require additional solar & batteries.

 

Question: Do I furnish my own pole or can I purchase one from your company?

Answer:  You can do whichever is most convenient for you. If you would like to use your existing pole simply let us know what type of pole you will be mounting to so we can supply the correct mounting hardware or If you would like us to provide a pole please see our optional poles under the options tab on the website.

 

Question:  What is the lead time for these systems?

Answer:  Our typical lead time is 4-6 weeks ARO.

 

Question:  Can the system be AC powered?

Answer: Yes, the system can be AC powered we will use our standard DC powered system without the solar and add a power supply in its place to convert the AC power coming in to our DC powered system.

 

Question:  Do you provide any installation, mounting, and wiring instructions?

Answer:  Yes, we do provide all this information and more available on our website for each model under “Support Documents”.

 

Question:  Can the beacons be stacked on top of each other or do they have to be one above sign and one below sign?

Answer:  You can have it whichever way best suits your needs. Just let us know when you are requesting a quote or making an order and we will make it to your needs.

LCAC-OPT40LCAC OPT40 For Models: LC110-D8; LC112-D12; LC105-S8; LC115-S12; LC106-S8; LC116-S12; LC124-D12. Remove 40W solar panel, solar panel mounting bracket, large battery box and regulator. Add 20W power supply and small control cabinet.
LCADD20WLCADD20W Additional 20 Watts Solar Panel
LCADD40WLCADD40W Additional 40 watt solar panel
LCADD80WLCADD80W Additional 80 watt solar panel.
LCBAT-12-55ALCBAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
LCBAT-12-100ALCBAT-12-100A 100 amp, 12V, AGM battery; Dimensions: 12.16″x6.75″x8.70″.
LCBAT-12-100W-27LCBAT-12-100W-27 100 amp, 12V, Wet cell battery; Dimensions: 12.16″x6.75″x8.70″
LCCB-BBK LCCB-BBK Box bracket with 1 clamp. Two (2) required. Price/each
LCBAT-12-55ALCBAT-12-55A 55 amp, 12V, AGM battery, Dimensions: 9.40″x5.50″x8.20″
LCCCTR-12 LCCCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
LCCCTR-14 LCCCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
LCCCTR-15 LCCCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
LCCCTR-20 LCCCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
LCCL-1023LCCL-1023 Cabinet lock Type 2 with tapered latch and 2 keys.
LCCL-1026LCCL-1026 Cabinet lock Type 1 police lock with tapered latch and 2 long keys.
LCCL-3PTLCCL-3PT 3 point locking system with Type 1 or Type 2 lock and 2 keys.
LCCTR-MBLCCTR-MB Mounting hardware per cabinet (if LightCast’s CTR pole not purchased) to include: pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
LCCTR-MHLCCTR-MH Mounting hardware per head (if LightCast’s CTR pole not purchased) to include: pole plate with set screw; 6″ nipple; tristud elbow with set screw.
LCCTR-PCLCCTR-PC Pole collar to strengthen CTR pole base connection.
LCCTR-UBBLCCTR-UBB Mounting hardware for box (U-bolt). Two (2) required.
LCCTR-UBHLCCTR-UBH Mounting hardware for head (U-bolt).
LCCTR-UBSLCCTR-UBS Mounting hardware for sign (U-bolt). Two (2) required.
LCCTR-UCLCCTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
LCSWXP SWXP OPTION FOR HAZARD BEACON. Microwave motion detector that detects pedestrians standing curbside and triggers a flasher switch.
LCTC26-B TC26-B OPTION FOR HAZARD BEACON. Microwave motion detector that detects oncoming vehicles and triggers operation of a flasher switch.
LCUCHANNELLLCUCHANNELL 8′ U-channel post (3lb per ft).
LCUP-CC-IP30-30LCUP-CC-IP30-30 Upgrade to 30 amp regulator with meter.
LCW3-1-XXXX-DG LCW3-1-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” Diamond Grade sign
LCW3-1-XXXX-HI W3-1-xxxx-HI Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” High Intensity sign
LCW3-3-XXXX-DG W3-3-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” Diamond Grade sign
LCW3-3-XXXX-HI LCW3-3-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” High Intensity sign
LCW8-5-XXXX-DGLCW8-5-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” Diamond Grade sign
LCW8-5-XXXX-HILCW8-5-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” High Intensity sign
LCW8-6-XXXX-DG LCW8-6-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” Diamond Grade sign
LCW8-6-XXXX-HI LCW8-6-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” High Intensity sign

 

8inch-single-yellow

 
Engineered USA

Lightcast offers : many versions newly designed oem and retail products for forklifts, carts, trucks, automobiles, campus, city, county, neighborhoods,manufacturing facilities and warehouses. We design and offer many versions of radar signs, radar speed signs, radar speed monitors, radar speed displays, radar speed trailers, radar trailers, speed monitors, driver feedback signs, radar monitors, solar speed signs, radar speed display units, mobile dolly radar sign, photo lidar, traffic calming devices, traffic calming signs, VSL Signs (Variable Speed Limit signs), radar speed feedback sign, MUTCD signs, changeable message signs boards, work zones signs variable message signs boards, work zone safety signs, Vehicle Speed Feedback Signs, Radar Speed Limit (R2-1) signs, signs in temporary traffic control zones, electronic speed display signs, vehicle activated sign (VAS). We also offer radar speed cameras, hard to find low speed radar, photo enforcement cameras, speed cameras, radar video, traffic cameras, parking lot deck video speed cameras, breathalyzers, breathalizers, alcohol testers, CMI intoxilyzers, breath testers, video analytics and videomanagement systems for traffic and speed control. Call and ask if we can build it for you.

free hit counters Website Monitoring
Translate »